HeTaiFeng concrete pump trucks are competitive products designed by HeTaiFeng MACHINERY.It is high relability, high efficiency, high security, high durability at an organic whole,which with reasonable matching on Chassis, power, electrical, hydraulic,pumpingsystem. Jib structures are flexible, the trucks move easily, safe and stable.
HeTaiFeng concrete pump trucks are competitive products designed by HeTaiFeng MACHINERY.it is high relibilit, high eficiency, high security,high durability at an organic whole, which with reasonable matching on Chassis, power, electrical, hydraulic, pumpingsystem. Jib structures are flexible, the trucks move easily, safe and stable.
Advantages:
Intelligence
Full hydraulic control technology
Fast fault location, saving time more than 50% in fault detection.
Electric control system
Intelligent electric control system, simple structure, reducing electric faults.
Safety
Hydraulic oil level Auto-detection and radiating technology
Auto-detect hydraulic oil and temperature, protecting hydraulic system.
Intelligent safety technology
All weld lines by 100% nondestructive flaw detection.
High efficiency
Full hydraulic commutation technology
Commutation time 10% lower, pumping eficiency 20% higher.
Advance Jib structure technology
Flexible and eficient placing, no blind angle.
Specification
30m Pump truck without chassis | ||
Chassis | ||
1 | Chassis Brand | SINOTRUK 4X2 |
2 | Emission standards | Euro-II |
3 | Wheelbase | 5200 |
4 | Max driving speed | 80km/h |
5 | Engine power | 280HP |
6 | Vehicle approach angle/departure angle | 19°/29° |
7 | Cab | Right cab |
8 | Tire type | 295/80R22.5，11.00R20 (6) |
Boom system | ||
1 | Maximum vertical height of boom (M) | 29.2 |
2 | Horizontal distribution radius of boom (M) | 25.6 |
3 | Depth of distribution (M) | 17.3 |
4 | Arm length of the first section (MM) | 7660 |
5 | Arm length of the second section (MM) | 6200 |
6 | Arm length of the third section (MM) | 5900 |
7 | Arm length of the fourth section (MM) | 5800 |
8 | Rotating angle of each arm | 90/180/230/245 |
9 | Control mode of boom | Electric proportion |
10 | Folding type of boom | M type |
11 | Rotating angle of turret | 470° |
12 | Span distance of front landing leg (MM) | 5842 |
13 | Span distance of rear landing leg (MM) | 4250 |
14 | Longitudinal distance between front and rear landing leg (MM) | 6177 |
15 | Opening mode of landing leg | X-H |
16 | Length of end hose (MM) | 3000 |
17 | Diameter of concrete delivery pipe (MM) | 125 |
Electric Control System | ||
1 | Working voltage: | 24 |
2 | Power Supply | 24 |
3 | Relay | SIEMENS |
4 | Wireless Remote Controller | OHM |
5 | Electric parts | Schneider |
Hydraulic transmission system | ||
1 | Type of hydraulic system |
Open type |
2 | System working pressure (Mpa) | 31.5 |
3 | Main Hydraulic Pump | PUSHI |
4 | Displacement of main hydraulic oil pump (ml/r) | 190 |
5 | Multi-Way Valve | Italy Commer |
6 | Boom Counterbalance Valve | NEC |
7 | Hydraulic Hose | Eaton |
8 | Hose Joint | Eaton |
9 | Hydraulic fuel tank capacity (l) | 420 |
10 | Cooling mode of hydraulic oil | Forced-air Cooling |
11 | High-low pressure changeover valve | None |
Pumping system | ||
1 | Form of concrete distribution valve | S valve |
2 | Max. theoretic concrete delivery volume | 80m3/h |
3 | Maximum concrete outlet pressure (Mpa) | 10.5 |
4 | Reversing times of distribution valve | 24 |
5 | Inner diameter/stroke of delivery cylinder | 200/1450 |
6 | Maximum feeding height (MM) | 1450 |
7 | Hopper capacity (M3 ) | 0.65 |
8 | Slump of pumped concrete | 160-220 |
9 | Dimension of allowable maximum aggregate (MM) | 40 |
10 | Type of hydraulic system | Open type |
DIMENSIONS&WEIGHT | ||
1 | Overall Length(mm) | 10010 |
2 | Overall Width(mm) | 2350 |
3 | Overall Height(mm) | 3563 |
4 | Total Weight(T) | 18.5 |
