You know what? Loader excavator belongs to one of the many types of excavator, is mainly used for excavation of earth and rock, according to the characteristics of the construction site, fine planning, heavy details, high innovation efficiency and other ideas of research and development, the characteristics are obvious, the effect is strong.
Using the characteristics of the teeth on the bucket, the soil is cut and installed in the bucket. After filling, the bucket is lifted and turned to the unloading point to achieve unloading, and then the turntable is turned and the bucket is lowered to the digging surface, and then the next digging operation is realized.
As we all know, the loader excavator belongs to the construction machinery, the two sides of the body are installed different working devices, one end is installed excavator bucket, the other end is installed loader bucket, both can work, so the name "loader excavator", the original, the loader excavator is also unknowingly to the construction side has brought a lot of convenience.
When trenches need to be dug, in order to facilitate the layout of pipes, laying underground cables, laying the foundation of buildings, and establishing drainage systems, many other tools can complete these operations, but the loader excavator can greatly improve the progress of the project. In contrast, the loader excavator is more compact, can also move in a variety of building environments, and can even "Mercedes" on the road.
Although a small number of small loaders and excavators may be smaller than excavator loaders, if the contractor also starts the loader operation at the same time as the excavation operation, the use of loader excavators can effectively save more operating time and costs. At the same time, the loader excavator and other mechanical engineering equipment have formed a fully mechanized construction system, intelligent mechanical system operation, and to a large extent, improve the efficiency of engineering work and effectively reduce construction risks.
The operators of loaders and excavators know that various problems often occur in the construction process. If the equipment has problems, it will not only affect the progress of the project, but also reduce the service life of the machinery. However, maintenance is inevitable, but the operation skills can also extend the service life of the loader excavator to a certain extent
In order to increase the stability of the loader excavator, ensure that the track is in full contact with the ground.
During the operation, it is necessary to confirm the direction of the track to avoid rollover.
Avoid facing the final drive in the direction of the loader excavator operation, otherwise the hose and travel motor may be damaged.
When the bucket is at a 30° Angle to the ground, the resistance generated by the excavation is very small and therefore very labor-saving; When the bucket rod is excavated, the Angle is between the front 45° and the back 30°, and the efficiency of using the loader excavator is very high. Most of the operation skills also need to be summarized by the relevant operators in the operation process.